What’s the pros & cons of a managed vs unmanaged switch? Or of just running multiple cables out of the router? (Assuming your router has sufficient ports.)
My router only has four downstream ports, and due to the layout of my house I only want to run one cable from the router to my home office anyway. If it had enough ports and the house was laid out differently I wouldn’t have bothered with the switch.
Unmanaged switches are usually quite a bit cheaper and just work. You plug everything in and that’s it. Managed switches need configuring and cost more. I paid $25 for my 8 port 10/100/1000 switch, while the managed version is about $120. With a managed switch you can do things like turn individual ports on and off, traffic limit and monitor per port, and other fancy networking things that I’ve never bothered with.
That’s that speed the ports are capable of. 10/100/1000 megabits per second. Most things with an Ethernet port nowadays are 10/100/1000 capable, and 2.5Gb is becoming reasonably common.
Weirdly, Roku and other smart TVs are often only 100Mb capable since 4k streaming only requires about 60Mb and if you are squeezing pennies a 1Gb port is a bit more expensive.
10Gb is just starting to get available for high end consumer devices.
All of the ports support all three speeds. When you first plug in, there is a quick round of negotiations where both sides basically say “Here are the speeds I can work, what about you?” Then they go with the highest that both support.
What’s the pros & cons of a managed vs unmanaged switch? Or of just running multiple cables out of the router? (Assuming your router has sufficient ports.)
My router only has four downstream ports, and due to the layout of my house I only want to run one cable from the router to my home office anyway. If it had enough ports and the house was laid out differently I wouldn’t have bothered with the switch.
Unmanaged switches are usually quite a bit cheaper and just work. You plug everything in and that’s it. Managed switches need configuring and cost more. I paid $25 for my 8 port 10/100/1000 switch, while the managed version is about $120. With a managed switch you can do things like turn individual ports on and off, traffic limit and monitor per port, and other fancy networking things that I’ve never bothered with.
Ah that’s interesting. Thanks!
What does 10/100/1000 mean?
That’s that speed the ports are capable of. 10/100/1000 megabits per second. Most things with an Ethernet port nowadays are 10/100/1000 capable, and 2.5Gb is becoming reasonably common.
Weirdly, Roku and other smart TVs are often only 100Mb capable since 4k streaming only requires about 60Mb and if you are squeezing pennies a 1Gb port is a bit more expensive.
10Gb is just starting to get available for high end consumer devices.
So is it some ports support 10, some support 100, and some support the full 1000? Or how does it work with the three different speeds?
All of the ports support all three speeds. When you first plug in, there is a quick round of negotiations where both sides basically say “Here are the speeds I can work, what about you?” Then they go with the highest that both support.