As a person who gets paid to assemble furniture, I have to second this. If you don’t have that clutch set right you’re going to have a bad time. People ask me how much it’s going to cost for me to assemble something and I tell them that they should probably try it themselves first because they’re not going to like how much I charge. They get angry. Then I get a message a week later asking me to undo whatever they messed up and assemble it at whatever price I quoted.
Sometimes I’m lucky and they just read the instructions incorrectly (which is so easy to do) and I have to take it apart and put it back together the right way. But sometimes they didn’t have the clutch set right. And I have to repair the permanent damage they caused. They’re very happy to have it assembled correctly. They are not happy that I did the entire project in 30 minutes. But part of that time difference is that I have a drill and allen wrench sets and they were working with hand tools.
I believe that’s what he means. The clutch on drills can stop applying torque at various increments so u don’t over tighten screws! Behind the chuck as u rotate the collar the various numbers are the tq limits (roughly, don’t take the units literally as quality and age of drill will impact exact figures)
And not all drills are the same. For example, I have the Hercules 20 volt drills from Harbour Freight. Those things have all the power in the world. And at their lowest possible setting on the clutch they will strip out a cabinet screw in the blink of an eye. So I had to get the 12 volt Hercules for doing delicate work.
As a person who gets paid to assemble furniture, I have to second this. If you don’t have that clutch set right you’re going to have a bad time. People ask me how much it’s going to cost for me to assemble something and I tell them that they should probably try it themselves first because they’re not going to like how much I charge. They get angry. Then I get a message a week later asking me to undo whatever they messed up and assemble it at whatever price I quoted.
Sometimes I’m lucky and they just read the instructions incorrectly (which is so easy to do) and I have to take it apart and put it back together the right way. But sometimes they didn’t have the clutch set right. And I have to repair the permanent damage they caused. They’re very happy to have it assembled correctly. They are not happy that I did the entire project in 30 minutes. But part of that time difference is that I have a drill and allen wrench sets and they were working with hand tools.
As someone who doesn’t know shit: when you say clutch, you mean set the power screwdriver to stop turning when it hits moderate resistance, right?
I ask because I think I understand, but I might not.
I believe that’s what he means. The clutch on drills can stop applying torque at various increments so u don’t over tighten screws! Behind the chuck as u rotate the collar the various numbers are the tq limits (roughly, don’t take the units literally as quality and age of drill will impact exact figures)
You got it.
And not all drills are the same. For example, I have the Hercules 20 volt drills from Harbour Freight. Those things have all the power in the world. And at their lowest possible setting on the clutch they will strip out a cabinet screw in the blink of an eye. So I had to get the 12 volt Hercules for doing delicate work.
Awesome! Thanks for the confirmation!