BritishJ

You’ve read it backwards. Its $15.20 Or to be exact 15.20€. So its spoken 15 Euros, 20.

I understand you. Very annoying these days.

For dynamics you have to ask MS for access to the sql back end. Then its granted for several hours as read only. That’s why you have to use synapse link to a data lake etc.

So buy one that’s a little more expensive and will. It’s still going to be tons cheaper that a commercial display and offer better performance

Or hear me out… Just don’t give it an internet connection.

Having an AS does not make you an ISP. It just means you have a public AS, which you can use to peer with providers on the Internet, if you have an agreement to peer.

You do understand, when you have VM’s set to auto scale, they shutdown when not in use, if you’re using horizontal scaling.

But it is. They’re stopped and deallocated. They start up when demanded. And shutdown when below a threshold or a certain schedule.

No we shut them down. They get deallocated the same way as shutting down a virtual server does. They’re not containers, the scaling part just turns them on and off based on workload or schedule

Finally someone who gets it.

Is it shutting down servers… Yes. it just does it based on parameters and thresholds.

Then you get things like VDI servers and jump boxes that only need to be on between certain hours, so get shutdown outside them hours.

In pretty much any enterprise using the public cloud. Everything is auto scaling, so shutdowns when not needed. Dev environments shutdown over night… If you’re not shutting down and scaling in the public cloud, you’re doing it wrong.

We power off servers in the enterprise all the time and on schedules 😂. Its called saving money.

They’re not actually lower powered, they just have a TDP limit set.

E.g. A 8500 and 8500T will idle at the same power consumption, but the 8500T has a TDP limit set.

Maybe the old Dysons. The new ones are rubbish. Shark all the way.

My solution is the correct way and easier way. You don’t need MAC address white-list. You just have a guest SSID with DHCP on, they get the IP from the subnet in that zone. No crazy subnet hacks etc.

Can I join your guest network, sure. Let me just grab your mac address, login to the DHCP server, create a reservation with a limited subnet mask that can still see the default gateway.

Or can I connect to you guest network, sure here is the code or scan that QR code. That’s it, they’re in the guest VLAN and subnet, zoned off on the firewall and have QOS applied to not saturate the network.

This is not the way to do it. The correct way would be multiple SSID’s with each tagged to their own VLAN.

Each VLAN has its own subnet. You can then use a zone based firewall, to allow the zones(subnets) to access each other.

You can also then apply QOS, to limit guest network speeds, prioritize LAN traffic etc.

And zone based firewalls are stateful, you can do rules such as LAN can reach IOT, but not the other way. Or IOT can only reach the IOT server, on specific ports.

When the kids breaks a window, they still have to pay. They just don’t have to source it, which means they might not be getting the best deal.

Plus, most landlords leave things till the last minute or make it such hard work for the tenant to report it, they don’t bother.

The maintenance is built into the rent, so they’re already paying for it, just not getting the best deal and losing the option to do it how they want.

Lots of countries only have mobile data to homes. Think African countries, India, Pakistan, then you’ve got Vietnam etc, with villages on rivers.

Its their profile photo.