It was a struggle. You went to buy some device and you had to check it was not one of those windows-only ones. Modems were particularly bad, for example.

You had to read the how-tos and figure things out. Mailing lists and newsgroups were the only places to find some help.

You had to find the shop willing to honour warranty on the parts and not on the whole system, as they had no knowledge of Linux at all. But once you found them, you were a recurring customer so they were actually happy. You might even have ended up showing them memtest86!

You would still be able to configure the kernel and be able to actually know some of those names, compilation would take several hours but it was a learning experience.

You could interact with very helpful kernel developers and get fixes to test.

You could have been the laughing stock of your circles of friends, but within you, you knew who’d have had the last laugh.

And yes, Loki games had some titles working on Linux natively, Railroad Tycoon was one. Too bad they were ahead of the times and didn’t last much.

Everything was harder back then - even when using Windows. But you had to be a real masochist to run Linux.

Computers were still quite new that most people had no real use for them beyond “work things”. Only nerds really used them for anything else. “Do you have an email address” isn’t a question you ask today.

“Kids these days” don’t realize how easy they have it when it comes to just general comparability. There weren’t a lot of standards yet and vendors had proprietary drivers and offered no support AT ALL for “lye nux”. You had to do a ton of research and fiddling to figure out if there was any support for your specific version of a specific chip used by any peripheral you used. And then to discover that you had to patch your kernel to add a driver that somebody had bodged together. So now you were running your own fun custom-kernel so you could get full-duplex rather than simplex audio! But it works!

Like - lets say today you want to buy an external IDE drive controller to plug in some old drives to for backup. You to to Amazon, search “USB external IDE enclosure” and buy the cheapest one you find. It probably works unless it’s defective. In '95 USB and Firewire were in their infancy so you would probably buy a serial or parallel port device. You would need to find whether Linux supported the specific version of the thing you wanted to buy, what tools there would be for it, etc. There was no standard “bulk storage device” driver that you could rely on or hope the vendor would implement. Even if you were an early adopter and got a USB or Firewire device it might have some “basic” functionality that works with OSS drivers but you couldn’t use all of it.

Vendors back then also shipped their own software with things, not just drivers. It was always just the absolute worst crap that was buggy as shit. But it would do a lot of the heavy lifting in working with their device. Like any Creative Labs audio player you wanted to get working. Sure it used USB but it didn’t just mount as storage device, you needed to use the worst GUI ever put before mankind to use it (under Windows). Under Linux you had to find a specific tool that would support pushing/pulling media from it. These days it would just mount as a drive automatically and you’d use standard desktop tools to interact with it.

Even with DOS/Windows you’d buy a game and as you came home from the store with it in a box wonder “will this work on my computer and how long will I need to mess with it?” I had to configure a specific CD-ROM driver to be used by DOS just to run Tie Fighter vs. X-Wing for example. Had a special boot floppy just for that game since that driver didn’t work with literally anything else I had.

Hardware just generally didn’t “auto configure”. “Plug 'n Play” was still very much in its infancy and you often had to manually configure hardware and install special drivers just for a particular card or peripheral.

IRQ 7 DMA 220. I probably just triggered some folks. If you were setting up a “Sound Blaster or compatible” then you had to know what interrupt it used (7) and what address it was on on the direct-memory bus (220). And you hoped there wasn’t a conflict with something else. If there was then there would be a DIP switch you could use to change the base memory address or IRQ from the default. But you were telling your software where to find the card.

USB was a f’ing game changer for peripherals. Serial and parallel ports were so slow and obnoxious to use. Before that there was no real way to “probe” the bus to discover what was there unless you knew exactly what you were looking for (there’s no lsusb for serial ports). So you just guessed at the driver you need and “modprob foo” hoping it worked.

It’s amazing what 20ish years of just developing standards has done.

If you want a taste of that world I highly recommend LGR on YouTube. He’s mostly Windows focused but look for videos where he tries out “oddware” to see how often he has trouble getting things to work on period hardware using the vendor-supplied software even. Then multiply that by 100x for Linux. :-)

Ah, yes, Linux around the turn of the century. Let’s see…

GPU acceleration? In your dreams. Only some cards had drivers, and there were more than 2 GPU manufacturers back then, too… We had ATi, nVidia, 3dfx, Cirrus, Matrox, Via, Intel… and almost everyone held their driver source cards close to their chest.

Modems? Not if they were “winmodems”, which had no hardware controller, the CPU and the Windows driver (which was always super proprietary) did all the hard work.

Sound? AC’97 software audio was out of the question. See above. You had to find a sound blaster card if you wanted to get audio to work right.

So, you know how modern linux has software packages? Well, back then, we had Slackware, and it compiled everything gentoo style back then. In addition, everyone had a hardon for " compiling from source is better"… so your single core Pentium II had to take its time compiling on a UDMA66-connected hard drive, constrained with 32 or 64 MB RAM. Updating was an overnight procedure.

RedHat and Debian were godsends for people who didn’t want to waste their time compiling… which unfortinately was more common even so, because a lot of software was source only.

Oh, and then MP3 support was ripped out of RedHat in Version 9 iirc, the last version before they split it into RHEL and Fedora. RIP music.

As for Linux on a Mac, there was Yellowdog, which supported the PPC iMacs and such. It was decently good, but I had to write my own x11 monitor settings file (which I still have on a server somewhere, shockingly, I should throw it on github or somewhere) to get the screen to line up and work right.

Basically, be glad Linux has gone from the “spend a considerable amount of time and have programming / underhood linux knowledge to get it working” to “insert stick, install os, start using it” we have now.

Slackware and Red Hat were the two distros in use in the mid 90s.

My local city used proper UNIX, and my university had IRIXworkstations SPARCstations and SunOS servers. We used Linux at my ISP to handle modem pools and web/mail/news servers. In the early 2000s we had Linux labs, and Linux clusters to work on.

Linux on the desktop was a bit painful. There were no modules. Kernels had to fit into main memory. So you’d roll your own kernel with just the drivers you needed. XFree86 was tricky to configure with timings for your CRT monitors. If done wrong, you could break your monitor.

I used FVWM2 and Enlightenment for many years. I miss Enlightenment.

Way back in the early 90s I needed to use LaTeX for university. The dos version was awful and couldn’t handle large documents. So the options were (1) a nextcube for $$$$, (2) Nextstep 3.3 for PCs for $$$ (some faculty had this), or (3) linux. So I downloaded slackware on dozens of disks.

You had to configure the kernel, which wasn’t too hard since the autoconfig walked you through it. The hardest part was setting up X11, which required a lot of manual config, and if you screwed up the timings you could destroy a CRT monitor. OpenStep was an option, so there was a moderately friendly windowmanager available.

Learning Emacs was also fairly unpleasant, but that was the best option for editing TeX at the time.

Everything would work, until it suddenly would break. But nonetheless I was somehow able to get that thesis done.

Ugh, modern linux is SOOOOOOOOOOOOOOOOOO much better

You could buy box copies of the original suse Linux that had manuals in the box the size of a TI graphing calculator manual.

Once you got X working everything else was cake by comparison.

It was prominent in smaller businesses that wanted or needed a Unix but weren’t going to pay what sun or IBM or HP and friends wanted for their hardware+software.

It ate the proprietary Unix market awfully quickly and I don’t think anyone really misses it.

For me, educational stuff was all windows with a small amount of macs and I don’t think I ever saw a Linux system in actual use anywhere.

I used it on the desktop but that was super rare because hardware support was nowhere as good as now - even getting X up was a challenge (go read up on mode lines if you want some entertainment).

This was me, you’re talking about me. 😂 In the 90’s Linux was barely getting started but slackware was probably the main distro everyone was focused on. That was the first one I ran across. This was probably late 90’s, I don’t remember when slack first came about though.

By the time the 2000’s came around, it was basically a normal thing for people in college to have used or at least tried. Linux was in the vernacular, text books had references to it, and the famous lawsuit from SCO v IBM was in full swing. There were distro choices for days, including Gentoo which I spent literally a week getting everything compiled on an old Pentium only for it to not support some of the hardware and refuse to boot.

There was a company I believe called VA Linux that declared that year to be the year of the Linux desktop. My memory might be faulty on this one.

Loki gaming was a company that specialized in porting games to Linux, and they did a good job at it but couldn’t make money. I remember being super excited about them and did buy a few games. I was broke too so that was a real splurge for me. I feel like they launched in the 90’s (late) and crashed in the early 2000’s.

Ah, Linux from scratch…

Also, hardware was… Harder back then, on Linux (mostly modems).

Beside that, software wise there was less stuff on Linux than today, so you had to check carefully you had what you needed.

But I was already a Linux user, and a linux-only user at that.

Hearing your monitor squeal when you got the modelines wrong was fun.

It was kind of an upstart thing and people were trying to find ways to monetize it.

My first Linux was Red Hat on a 486 in 1998 and it was different than I was used to. I was a kid who didn’t know how to startx so I just emailed a developer using pine and they helped me figure out and choose a window manager. Nobody even got mad at this barely teenager just emailing dumb questions. I got lost with fvwm95 and afterstep. I tried every window manager, mlvwm, qvwm, IceWM, etc but ended up liking blackbox the most. I had 12MB of RAM on my first Linux system, 1MB of vram and 256 colors. We were all sarcastic in a cringe, adolescent way but everyone was friendly and helpful.

There was this fascination with monkeys in pop culture, but not real monkeys --chimps and gorillas. People would throw monkey in their username or in some random nu-metal song for some reason. There were monkeys you could download for your desktop. There was this thing by PC gamer called coconut monkey. I don’t know what that’s all about. And anyway I associate this period with the foot logo of Gnome, which was unprofessional but that was the point. Also, gimp was a funny name for an app (its cringe today), and PAN stood for pimp ass news.

I discovered Slashdot and Freshmeat and Sourceforge and kuro5hin. Usenet groups were great back then. So was irc. I trolled Slashdot and got negative karma and for the next 15 years before we all moved to SoylentNews, my comments started at -1.

Nobody knew how to pronounce Linux. Some people said Line-X because his name was Linus like on Charlie Brown, and some people said Leenucks.

At some point it became a corporate thing and the term Linux was everywhere. Randomly on magazine covers. There was also this divide, almost marketing driven, it seemed that people who liked warez and whatever started to love Microsoft and shit on Linux. So gamers especially started to shit talk and that’s the first time that being a computer nerd wasn’t like this unifying concept, there was an us versus them divide. People who could compile code they wrote and who were genuinely curious versus people who just wanted to download a bunch of shit and show you how big their start menu was and play games. I think this divide still exists.

There was a bunch of commercial software for Linux too. Metro-X, Accelerated X, Motif, Applixware, Star Office. Descent 3. One of the Quakes. Motif, the toolkit, looked amazing. I thought CDE with themes was the coolest looking thing ever. But I couldn’t afford CDE so I used XFce which was an XForms knockoff. And then enlightenment came along and pushed the boundaries of what we thought a desktop would be. Also, I was able to drag console windows with transparency on that 486 on e16.

Debian kind of had an elitist community and talked down to people so I never used it. I liked Slackware the most and spent a weekend downloading the floppies over a dialup connection. That led to me discovering FreeBSD in 1999, which I stuck with for almost a decade.

Later, a comp sci student, I didn’t see Linux at university in the labs. It was Solaris and macOS in the mid 2000s. Eventually, the Solaris computers were shut down and replaced with more Macs.

My girlfriend’s Windows ME computer was so full of spyware so I installed SuSE with KDE on it for her in her dorm. And she was able to do her papers in AbiWord. And 20+ years later we are married and it all worked out.

I finally switched to Debian stable about 4 years ago and have no complaints. It’s a lot easier now.

Edit: A couple more things: I started using Linux because I was very poor and it was free and Windows 95 was a mess on my system. I mean dirt roads and no water for long periods of time. My 486 in 1998 was sort of old already and it came with 8mb of RAM as a hand me down in 1995, but I was dumpster diving outside a community college when I was 12 and found an IBM PS/2 and stole the 30 pin SIMMs out of it. And one of them worked in my 486 computer so I ended up with 12mb of RAM. I overclocked it to 100mhz. That 486 got me through high school and into college where I ended up with an AMD system with a pirated Thai RM233 Windows 2000. But I went back to FreeBSD because I needed a compiler. So that kind of knowledge was useful and now that I have a good career from what I learned, I have donated a lot of money over the years to different projects. Also I make sure my kids have only ever known Linux and Gnome and it works fine for them.

My linux experience:

1993 - Hey, there’s a new Unix-like thing for the PC. You can check it out down at the university computer club.

1994 - Wow, I finally managed to get X running

1996 - It was somewhat normal for more nerdy software developers to run linux full-time on their desktop at work.

1998 - Linux was taking over servers to the point where you rarely saw Solaris, HP-UX, AIX around any more.

2002 - Everyone agreed that linux was pretty much ready to take over the desktop as well.

I remember running Slackware and having to recompile the kernel for just about any hardware you added. I configured a box to be used as a router before routers were something you could get commonly at Best Buy.

I was taking comp. sci. at university and all our work was done on Sparc workstations. Having a Unix-like machine at home was a great help during that time

Not a veteran, but… During the 90s, while still in primary school, a friend of mine bought a Chip magazine with a CD attached and instructions inside the magazine how to install a mysterious thing called “Linux” from said CD. It was supposed to be something like Windows 95, but new, better and it had a Penguin on it, so we decided to try it.

We followed magazine’s installation guide to the letter (or at least we thought so) until the installation stuck at error saying KERNEL PANIC!!! and wouldn’t let us finish. We didn’t understand English much back then, but we found the panicking kernel hilarious. Anyway, we figured it’s been enough h4Ck!nG for that day and got back to playing Diablo 1.

If you weren’t at a university it was generally a challenge to get hold of disks. Downloading at home took forever on a 28.8 or even 56k modem (ie. 56 kilobits per second).

Slackware and Redhat disk sets were the thing, in my experience. But generally that only gave you the compiled code, not the source (although there was an another set of disks with the source packages).

If you wanted to recompile stuff you had to download the right set of packages, and be prepared to handle version conflicts on your own (with mailing list and usenet support).

Recompiling the kernel with specific patches for graphics cards, sound cards, modems and other devices (I remember scanners in particular), or specific combinations of hardware was relatively common. “Use the source, Luke!” was a common admonition. Often times specific FAQ pages or howtos would be made available for software packages, including games.

XFree86 was very powerful on hardware it supported, but was very finnicky. See the other posts about the level of detail that had to be supplied to get combinations of graphics cards and monitors working without the appearance of magic smoke.

Running Linux was mostly a enthusiast/hobbyist/geek thing, for those who wanted to see what was possible, and those who wanted to tinker with something approaching Unix, and those who wanted to stretch the limits of what their hardware could do.

Many of those enthusiasts and hobbyists and geeks discovered that Linux could do far more than anyone previously had been prepared to admit or realise. They, and others like them, took it with them into progressively more significant, and valuable projects, and it began to take over the world.