6mese nutz, lmao gottem.

IMHO, security updates are more important than OS updates, and Fairphone is good in that regard. I’d be hard-pressed to even name a killer feature from the last few versions of Android (or iOS, for that matter).

If Hollywood has taught me one thing, it’s that the hero is handsome and photogenic and the villain is a ugly and greasy…

JUST SAYING.

Given the 2.5Gb port also supports PoE in, I think the idea is that you can plug this into a 2.5Gb PoE port on a seperate managed switch and that’s the only connection you need; that’s certainly how I would use it. WAN connections could be plugged into that switch, along with the APs, user devices, servers, etc, with them seperated using VLANs. Assuming everything was gigabit except for that 2.5Gb link to the OpenWRT Thing™, you’d be hard-pressed to saturate that 2.5Gb port and you’d still have the gigabit port completely free for… whatever.

I think you might have missed the point: with a managed switch that 2.5Gb port can be used to handle multiple WAN and LAN connections simultaenously. My home network includes two WANs and six LANs split purely by VLAN tagging and that 2.5Gb connection should handle all of them just fine.

It’s full duplex so it’s 2.5Gb each way simultaneosly. Most NICs support half-duplex but I don’t know of any good reason to use that. I used to have a BananaPi based router that could comfortably saturate it’s gigiabit interface. I assume there’s some kind of offloading going on.

It happens.

Source: https://www.youtube.com/watch?v=hqIYmYBNYxE&t=1646s

Most of those run OpenWrt or PfSense. Assuming the hardware is well-supported by the open source software it runs, there’s a argument to be made that there’s no difference. There’s always the risk of them using some weird chipset that won’t be supported in a year’s time. The only difference is that the OpenWrt One is specifically designed for OpenWrt with well-supported hardware.

I also wanted to chime in with the perennial point that while this device is a pure expression of the OpenWrt project, they also support hundreds of other devices including, amazingly, a number of large switches, so if you wanted to ditch the separate route appliance altogether you could get all the features with only switch hardware.

Exactly this. With VLAN tagging you can plug that single 2.5Gb connection into a 48-port managed switch and effectively have up to 47 different NICs if that’s what floats your boat. They’d all share the 2.5Gb but that’s still more than a lot of small networks need.

The LAN and WAN ports aren’t labelled as such on the device and can be configured to do anything. The 2.5Gb port can also be used to take in PoE so for a lot of people - myself included - this will be the only port that’s actually used, or at least the port that will be used the heaviest. The reason, I think, that it’s configured as WAN by default is so that the LAN port can be used to plug a laptop in directly without disconnecting the whole network.

Devices should be flexible.

Agreed. It’s a pity, then, that no-one has invented a single port that can replace USB-A, DisplayPort, HDMI, propriatary power connectors, Thunderb… oh… wait…

The USB4 protocol can handle 160Gb/s split asymettrically (so, say, 120Gb/s out, 40Gb/s in), wheras the upper limit for DisplayPort’s highest bandwidth mode, Quad UHBR 20, is 80Gb/s in one direction. So you can saturate your DisplayPort 2.0 quad-channel with more than enough bandwidth to power three 10K 60Hz 30-bit (i.e. very high-end) monitors in DSC mode, and still only be using half the bandwidth of USB4, all using a single cable which I can also use to charge my earphones.

Yo mama’s like exFAT; she’s got no permissions so anyone can access anything and her low requirements mean she gets embedded everywhere.

I know, right? Why deal with Problem X when Problem Y also exists?

In the UK it’s got to be the City of London. Famous for being an ancient city established by the Romans and awash with history, now one of the world’s biggest financial centers with a modern skyline of famously distinctive skyscrapers. It’s home to some world-famous landmarks like Saint Paul’s Cathedral and Tower Bridge, and has a population of about 10,000.

The City of London is not to be confused with London, London, London or London.

Are Temu the ones who say “pretend you’re a billionaire” or something but their ads always have the most bizarre, undesirable-looking, nasty, cheap, plastic things in them?

Bem & Georrey

We’re talking about Southern US pronunciation so much that I read your comment from “do I” onwards as if it was being spoken like a Southern Belle.