Yeah it’s pretty straightforward.

I do use a lot of CLI for ZFS because it’s pretty easy.

Open Media Vault with OMV Extras

I have it on Proxmox. Works like a charm

Any any that mofo

Maybe I’m blind, but is there a docker composed YAML?

Would like to reverse proxy this into my VPS.

I have 3 main NASes

78TB (52TB usable) hot storage. ZFS1

160TB (120TB) warm storage ZFS2

48TB (24TB) off site. ZFS mirror

I rsync every day from hot to off site.

And once a month I turn on my warm storage and sync it.

Warm and hot storage is at the same location.

Off site storage is with a family friend who I trust. Data isn’t encrypted aside from in transit. That’s something else I’d like to mess with later.

Core vital data is sprinkled around different continents with about 10TB. I have 2 nodes in 2 countries for vital data. These are with family.

I think I have 5 total servers.

Cost is a lot obviously, but pieced together over several years.

The world will end before my data gets destroyed.

There is portainer. CLI until you install portainer then everything is GUI based.

Many grocery items are cheaper in Germany than in the US.

Of course that’s skewed due to the USD vs EUR cost difference.

A wire with a screw. Like the aviation industry.

I would like to bring the attention to LoRa.

Meshtastic is a good example of leveraging LoRa.

The ticket is amazing, but I’ve been 0 of 8 on time trains this month.

I just use adguard home. Worker a little better in my docker setup.

We use Tailscale to share between accounts.

But for large transfers I use an encrypted HDD.

I selfhost immich in a netcup VPS. They have a 2tb VM for about 22 euros a month via a black Friday sale

I’m on a 1tb arm plan for about 10 euros a month.

I am running Jellyfin in an Open Media Vault VM on top of Proxmox.

Jellyfin is in docker in OMV.

All disks are mounted in OMV and then mounted in Docker.

I have a 14600k that has an iGPU passthrough and it works fine. (Same generation iGPU I think)

mkdir /lib/firmware/i915/
cd /lib/firmware/i915/
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/adls_dmc_ver2_01.bin
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/tgl_guc_70.bin
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/tgl_guc_70.1.1.bin
wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/i915/tgl_huc.bin
update-initramfs -u

Then try this docker container to see if encoding works

docker run --rm ghcr.io/linuxserver/ffmpeg ffmpeg -hwaccels

Run the container

docker run --rm \
  --device /dev/dri:/dev/dri \
  --entrypoint ffmpeg \
  ghcr.io/linuxserver/ffmpeg \
  -init_hw_device qsv=hw:/dev/dri/renderD128 \
  -hwaccel qsv -hwaccel_device hw -hwaccel_output_format qsv \
  -f lavfi -i testsrc=duration=3:size=1280x720:rate=30 \
  -vf 'format=nv12,hwupload=extra_hw_frames=64' \
  -c:v h264_qsv -f null -

I’m on mobile so formatting maybe shit. But I think you can get the right idea with this.

I use a Sierra Wireless EM9293 with a USB3 to M.2 Key B 4G 5G Modem Adapter Enclosure with SIM Card Slot - V7 from Wireless Haven.

Impressive kit and costs me about 300 in parts.

Works natively with my Mikrotik USB port.

5G as in cellular?

I use MikroTik with a USB CAT 20 modem.

Client side or server side?

Reverse proxy if your home internet is decent.

50mbps upload is fine for me.

I had it running on a mini PC with 8tb of storage, but I couldn’t get the latency down to where I want it, so I moved it to a VPS.

I run it on a VPS. Works great across oceans. Biggest gripe is that it doesn’t load local content first. It checks online and then pulls from those thumbnails. So if you have a weak or slow connection, then you’ll get a spinning wheel of death or assets that don’t load properly.

No shit. Learn something new every day.